Please respond if anyone reading this has suggestions, but I think I figured out the best it can be for my setup. Thanks all. I use an Apollo connected via Thunderbolt. What is your buffer size set too? I always use a low buffer size when tracking with Low Latency mode enabled. All it does is bypass any plugins whose latency is above the set threshold. Top Mentioned Manufacturers. Facebook Twitter Reddit LinkedIn.

This includes any effects or plugins you may be using. Your Hard Drive. Where your audio is being recorded to. Output of your DAWs master fader. Back through the sound drivers. Back through your sound card. Headphone or Speakers.

Your ears. Ableton Live Lite Multi-core processor. Quick Tips In closing here are some quick tips that are always worth looking into to help reduce audio latency. Close all other programs running on the computer, apart from those you have open for your audio work. Turn off wireless networking when running your DAW.

Restart your computer. Look at the CPU usage of your system. Record Projects at higher Sample Rates. Because a higher sample rate causes the computer to process the audio more rapidly, it fills and empties the buffer faster.

However, whether the computer can process the audio more rapidly is not always a given. Delete or make inactive any unused tracks and plugins. Use zero-latency monitoring. This is a feature of the sound card which bypasses the effects of computer-based latency. Buffer sizes should be adjusted in increments of Monitor through headphones. Monitoring through headphones will remove that latency. My set up is using the Pod Go as the input device via USB and a Scarlett 2i2 interface as the output running studio monitors.

At random times the Pod Go will experience a hiccup with a resulting dramatic increase in latency forcing me to close and reopen Logic Pro. The DAW will auto adjust latency for recording itself then and everything will be in sync. Thanks for the response. You are using two audio interfaces at the same time. This leads to clock misalignment in those units. Just use Scarlett as the main interface and connect your POD to it via line in. I like to tweak the Pod Go presets via the Pod Go editor while I’m in a recording session while also having the monitors running out of the Scarlett my default setup.

Kind of a hassle to always have to run the monitors directly out of the Pod Go whenever I want to record and also tweak presets on the fly via the editor. If it gets worse, I try to freeze my channels to keep adding big plugins to the project. Sometimes I have to figure out something, so I open a piano plugin to play with the song, and once in a while, I record extra back vocals.

You can do this when Low Latency Mode is on. This one also saves lives. Sometimes I decide if there are any needs for a pad synth or some extra sub frequencies from a synthesizer. And the last thing that I want is to forget what I just found.

This setting continuously records what you play on your MIDI, so you can always find the best part of your improvisation. I discovered this one later, but I love it. Because it helps a lot to see the timing on the ruler with the bars. It was a habit when I was using Pro Tools, and I was missing that feature.

I always think of the channels in groups because it helps to understand the song. For example, when you download a channels multitrack file and import it to your mixing project, it can be scary at first.

Also, you can process the same kind of sounds together if you use those bus groups. For example, I always tend to compress the drums together to get the most energy out of them. Therefore, I have to route all of them to a bus group. Having that group from the beginning is perfect for me. The bus routings are on the second page of the buses, so your primary bus names can stay the same.

You can see it below:. Set the sample rate of your project Set the sample rate for your project when you first create it. Click Devices. Turn Low Latency Mode on to manage plug-in latency Certain plug-ins can contribute to input monitoring latency, particularly dynamics plug-ins with look-ahead functions. Published Date: November 12, Yes No.

One moment, please

 
Why don’t you plug the Studio Monitors direct into the POD Go so you have latency free monitoring? The DAW will auto adjust latency for. Apogee hardware support for Direct Monitoring feature in Logic Pro X provides hassle-free elimination of recording latency · Works with Apogee Element Series and. I’m using the latest version of Logic Pro X with the latest OS on a having problems with latency that occur even when I try to record.

Logic pro x latency while recording free

To start the conversation again, simply ask a new question. II have a problem with latency of some sort. It seems to affect my audio and midi. Sometimes I’ve fixed it by shutting down logic and re-opening. Then it creeps in again. Other times like now it didn’t make much difference. I’ve used logic before on an earlier mac without much of an приведу ссылку but this new mac isn’t playing nice go figure.

Posted on Feb 15, PM. Page content loaded. Feb 15, PM in response to thisisdave In response to thisisdave. Are you using any latency causing plugins on the master track?

Feb 15, PM. I’ve noticed the issue without about no plugins. Later would add things like compression etc. Feb 16, PM. Feb 16, PM in response to thisisdave In response to thisisdave. Yes, 32 will have less latency but that’s not your problem, in fact, it could be adding to the problem.

Stabilize your system first, did you set the recording delay to 94 samples? If so why? Feb 17, PM. Feb 17, PM in response to thisisdave In response to thisisdave. One thing I’ve noticed also is that if I leave по ссылке computer up with logic and come back a day or two later to record there’s more latency. If I shut re-boot logic it seems much tighter.

Never had this issue prior but something I’ve noticed logic pro x latency while recording free this issue also. Under processing threads, where it says auto, click and hold and you should see sets of numbers. What ever the largest number is let’s say 8 set it to half that. Logic pro x latency while recording free close Logic, reboot the computer and see if the latency stays away. There was a 2 and a 4 when I click and hold. So far so good.

Thx for the help. Feb 18, PM. Feb 18, PM in что sketchup pro 2018 plugins free download free download фраза to thisisdave In response to thisisdave. If it holds logic pro x latency while recording free and keeps working in this configuration set the processing threads to 4 and see how that works out.

Logic pro x latency while recording free 20, AM in response to thisisdave In response to thisisdave. I hope the link below helps you with your latency issue, that’s what this tutorial is logic pro x latency while recording free. If you haven’t chanced upon macprovideo I highly recommend it. I have learned a lot from this awesome tutorial site. Feb 20, AM. Feb 20, AM in response to animist08 Logic pro x latency while recording free response to animist I think Dave’s latency issue is different than the standard latency problems, I could be wrong but the latency he’s experiencing is not consistent and has possibly do with his setup, system вот ссылка audio interface, time will tell.

Does your system seem to have latency if you leave it up a day or two? Mine does. I re-boot Logic and then it seems fine. Odd as I don’t recall this issue prior to the new mac. Feb 21, PM. Feb 21, PM in response to thisisdave In response to thisisdave. Dave, as a work-around Does that help? I avoid USB at all costs. To be honest, I think USB is weak protocol for audio.

OK, Logic pro x latency while recording free using a roland quad capture that I haven’t hd issues with for years. Thinking about changing my interface to thunderbolt which I believe is way faster than both usb and firewire. Feb 23, PM. Feb 24, AM in response to thisisdave In response to thisisdave. Make sure you have the latest System Update 1. Feb 24, AM. Additional Thought: If you have put Magic AB on the Master channel or elsewhere then you will get latency even when it is продолжить чтение. Remove it completely from any channel strips Question: Q: Logic pro x latency More Less.

Community Get Support. Sign in Sign in Sign in corporate. Browse Search. Ask a question. User profile logic pro x latency while recording free user: thisisdave thisisdave. It’s a v More Less. Reply I have this question too 68 I have this question too Me too 68 Me too. All replies Drop Down menu. Loading page content. User profile for user: Pancenter Pancenter. Feb 15, PM in response to thisisdave In response to thisisdave Just curious, what do you have recording delay set to 94 samples, did you run the Loopback test?

Reply Helpful Thread reply – more options Link to this Post. What should the delay be if any? Changed the buffer I thought the lower would make it easier to run and less latency Plugins?

I use superior drummer for drums and bias for my guitar amp on a channel. Thanks for the help thus far and I look forward to more input. Reply Helpful 1 Thread reply – more logic pro x latency while recording free Link to this Post.

Feb 17, PM in response to thisisdave In response to thisisdave One thing I’ve noticed also is that if I leave my computer up with logic and come back a day or two later to record there’s more latency. Feb 17, PM in response to thisisdave Приведенная ссылка response to thisisdave thisisdave wrote: “Stabilize your system first” What на этой странице would I take to do that? This is what we’re trying to do Feb 18, PM in response to thisisdave In response to thisisdave dave, If it holds up and keeps working in this configuration set the processing threads to 4 and see how that works out.

User profile for user: animist08 animist Feb 20, AM in response to thisisdave In response to thisisdave I hope the link below helps you with your latency issue, that’s what this tutorial logic pro x latency while recording free about. Feb 20, AM in response to animist08 In response to animist08 animist08 wrote: I hope продолжить link below helps you with your latency issue, that’s what this tutorial is about.

Those are excellent tutorials though. Feb 21, PM in response to Pancenter In response to Pancenter Does your system seem to have latency if you leave it up a day or two? Feb 21, PM in response to thisisdave In response to thisisdave Dave, as a work-around Whatever you do, don’t set the buffer size to 32, keep it at or 64 minimum No, my system does not do this but it’s an older MacPro running an older operating system and Logic 9, I use only Firewire or an Internal PCIe card for audio.

Does it seem that the interface is the issue here? This could be a long term resolution? Feb 24, AM in response to thisisdave In response to http://replace.me/21195.txt Make sure you have the latest System Update 1. Feb 24, AM in response to Pancenter In response to Pancenter Additional Thought: If you have put Magic AB on the Master channel or нажмите чтобы прочитать больше then you will get latency even when it is “disabled” Remove it completely from any channel strips Welcome to Apple Support Community.

Ask a question Reset.

Direct Monitoring in Logic Pro X Eliminates Latency – Apogee Electronics – A Compatible Mac

 
 
When you enable Low Latency Mode, Logic temporarily disables all plugins and routing that is introducing Latency to your Project. Which allows. Apogee hardware support for Direct Monitoring feature in Logic Pro X provides hassle-free elimination of recording latency · Works with Apogee Element Series and. When tracking individual tracks in the studio these produce a delay on the output of the klopfeist click EVEN WHEN THEY ARE TURNED OFF. I.